thad/linuxcnc
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
acdcd89b57556c3193f5f6fc052f55a94fa7d83c
linuxcnc/configs/sim.pyvcp_demo-1/pyvcp_bottom_panel.ini
Thaddeus-Maximus f3953d66ae ?
2026-04-03 15:58:58 -05:00

236 lines
6.0 KiB
INI
Raw Blame History

# EMC controller parameters for a simulated machine.
# General note: Comments can either be preceded with a # or ; - either is
# acceptable, although # is in keeping with most linux config files.
# General section -------------------------------------------------------------
[EMC]
# Version of this INI file
VERSION = 1.1
# Name of machine, for use with display, etc.
MACHINE = Pyvcp_demo1
# Name of NML file to use, default is emc.nml
#NML_FILE = emc.nml
# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
# DEBUG = 0x7FFFFFFF
DEBUG = 0
# Sections for display options ------------------------------------------------
[DISPLAY]
DISPLAY = axis
PYVCP = pyvcp_bottom_panel.xml
# places the pyvcp panel at the bottom of the Axis window
PYVCP_POSITION = BOTTOM
# Cycle time, in seconds, that display will sleep between polls
CYCLE_TIME = 0.100
# Path to help file
HELP_FILE = doc/help.txt
# Initial display setting for position, RELATIVE or MACHINE
POSITION_OFFSET = RELATIVE
# Initial display setting for position, COMMANDED or ACTUAL
POSITION_FEEDBACK = ACTUAL
# Highest value that will be allowed for feed override, 1.0 = 100%
MAX_FEED_OVERRIDE = 1.2
MAX_SPINDLE_OVERRIDE = 1.0
# Prefix to be used
PROGRAM_PREFIX = /home/linuxcnc/linuxcnc/nc_files
# Introductory graphic
INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 5
#EDITOR = geany
INCREMENTS = 5mm 1mm .5mm .1mm .05mm .01mm
#INCREMENTS = 1 mm, .01 in, .1mm, 1 mil, .1 mil, 1/8000 in
[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Grayscale Depth Image
PROGRAM_EXTENSION = .py Python Script
PROGRAM_EXTENSION = .nc, .NC
png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
dxf = image-to-gcode
py = python3
nc = /usr/bin/axis
# Task controller section -----------------------------------------------------
[RS274NGC]
# File containing interpreter variables
PARAMETER_FILE = sim_mm.var
# Motion control section ------------------------------------------------------
[EMCMOT]
EMCMOT = motmod
# Timeout for comm to emcmot, in seconds
COMM_TIMEOUT = 1.0
# BASE_PERIOD is unused in this configuration but specified in core_sim.hal
BASE_PERIOD = 0
# Servo task period, in nano-seconds
SERVO_PERIOD = 1000000
# Hardware Abstraction Layer section --------------------------------------------------
[TASK]
# Name of task controller program, e.g., milltask
TASK = milltask
# Cycle time, in seconds, that task controller will sleep between polls
CYCLE_TIME = 0.001
# Part program interpreter section --------------------------------------------
[HAL]
# The run script first uses halcmd to execute any HALFILE
# files, and then to execute any individual HALCMD commands.
#
# list of hal config files to run through halcmd
# files are executed in the order in which they appear
HALFILE = core_sim.hal
HALFILE = axis_manualtoolchange.hal
HALFILE = simulated_home.hal
#HALFILE = gamepad.hal
# list of halcmd commands to execute
# commands are executed in the order in which they appear
#HALCMD = save neta
# Single file that is executed after the GUI has started. Only supported by
# AXIS at this time (only AXIS creates a HAL component of its own)
POSTGUI_HALFILE = pyvcp_bottom_panel.hal
HALUI = halui
[HALUI]
# add halui MDI commands here (max 64)
# Trajectory planner section --------------------------------------------------
[TRAJ]
COORDINATES = X Y Z
LINEAR_UNITS = mm
ANGULAR_UNITS = degree
DEFAULT_LINEAR_VELOCITY = 30.48
MAX_LINEAR_VELOCITY = 53.34
DEFAULT_LINEAR_ACCELERATION = 508
MAX_LINEAR_ACCELERATION = 508
POSITION_FILE = position_mm.txt
# Axes sections ---------------------------------------------------------------
# First axis
[EMCIO]
# Name of IO controller program, e.g., io
EMCIO = io
# cycle time, in seconds
CYCLE_TIME = 0.100
# tool table file
TOOL_TABLE = sim_mm.tbl
TOOL_CHANGE_POSITION = 0 0 50.8
#RANDOM_TOOLCHANGER = 1
[KINS]
KINEMATICS = trivkins
JOINTS = 3
[AXIS_X]
MIN_LIMIT = -254
MAX_LIMIT = 254
MAX_VELOCITY = 30.48
MAX_ACCELERATION = 508
[JOINT_0]
TYPE = LINEAR
HOME = 0.000
MAX_VELOCITY = 30.48
MAX_ACCELERATION = 508
BACKLASH = 0.000
INPUT_SCALE = 157.48
OUTPUT_SCALE = 1.000
MIN_LIMIT = -254
MAX_LIMIT = 254
FERROR = 1.27
MIN_FERROR = .254
HOME_OFFSET = 0.0
HOME_SEARCH_VEL = 0
HOME_LATCH_VEL = 0
HOME_USE_INDEX = NO
#HOME_IGNORE_LIMITS = YES
HOME_SEQUENCE = 0
#HOME_IS_SHARED = 1
# Second axis
[AXIS_Y]
MIN_LIMIT = -254
MAX_LIMIT = 254
MAX_VELOCITY = 30.48
MAX_ACCELERATION = 508
[JOINT_1]
TYPE = LINEAR
HOME = 0.000
MAX_VELOCITY = 30.48
MAX_ACCELERATION = 508
BACKLASH = 0.000
INPUT_SCALE = 157.48
OUTPUT_SCALE = 1.000
MIN_LIMIT = -254
MAX_LIMIT = 254
FERROR = 1.27
MIN_FERROR = .254
HOME_OFFSET = 0.0
HOME_SEARCH_VEL = 0
HOME_LATCH_VEL = 0
#HOME_USE_INDEX = NO
#HOME_IGNORE_LIMITS = NO
HOME_SEQUENCE = 0
# Third axis
[AXIS_Z]
MIN_LIMIT = -150
MAX_LIMIT = 101.6
MAX_VELOCITY = 30.48
MAX_ACCELERATION = 508
[JOINT_2]
TYPE = LINEAR
HOME = 0.0
MAX_VELOCITY = 30.48
MAX_ACCELERATION = 508
BACKLASH = 0.000
INPUT_SCALE = 157.48
OUTPUT_SCALE = 1.000
MIN_LIMIT = -150
MAX_LIMIT = 101.6
FERROR = 1.27
MIN_FERROR = .254
HOME_OFFSET = 0
HOME_SEARCH_VEL = 0
HOME_LATCH_VEL = 0
#HOME_USE_INDEX = NO
#HOME_IGNORE_LIMITS = NO
HOME_SEQUENCE = 0
#HOME_IS_SHARED = 1
# section for main IO controller parameters -----------------------------------
Reference in New Issue View Git Blame Copy Permalink