#<_z_clearance> = 12
#<_rampang>     = 10


;#<_stepover>  = 0.1

;#<_overlap> = 0

; mode refernce
; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside

G21  ; G21 mm / G20 inch
;G10 L1 P1 Z0.0 R[/2] ; set tool
;T1   ; set tool to T1
;M06  ; manual toolchange
G54  ; absolute coordinates
F170  ; inch or mm/min (300 mm/min = about 1 ft/min)

;#<_z_top> = 1
;#<_z_bot> = -8
;o<pocket_circ> call [0] [15][35] [21]
;#<_z_top> = 1
;#<_z_bot> = -8
;o<pocket_circ> call [0] [40][15] [21]

;#<_z_top> = 1
;#<_z_bot> = -8
;o<pocket_circ> call [0] [ 70][13] [16]
;#<_z_top> = 1
;#<_z_bot> = -8
;o<pocket_circ> call [0] [ 95][13] [16]
;#<_z_top> = 1
;#<_z_bot> = -8
;o<pocket_circ> call [0] [120][13] [16]
;#<_z_top> = 1
;#<_z_bot> = -8
;o<pocket_circ> call [0] [115][37] [16]
;#<_z_top> = 1
;#<_z_bot> = -8
;o<pocket_circ> call [0] [ 90][37] [16]
;#<_z_top> = 1
;#<_z_bot> = -8
;o<pocket_circ> call [0] [ 65][37] [16]

#<_z_top> = 1
#<_z_bot> = -8
o<pocket_circ> call [0] [150][29] [29]


M2 ; end program