#<_z_clearance> = 0.4
#<_rampang>     = 5

; mode reference
; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside


G20  ; G21 mm, G20 inches
G10 L1 P1 Z0.0 R[.1875/2] ; set tool
T1   ; set tool to T1
M06  ; manual toolchange
G54  ; absolute coordinates
;F10  ; mm/min (300 mm/min = about 1 ft/min)

;o<pocket_circ> call [0][0] [2.05] [.1][-.5] [.01] [0+4]
;o<frame_circ> call [0][0] [2.055] [.1][-.5] [0] [0]

F3
;o<pocket_circ> call [+0.394][-.394] [5.2/25.4] [0.1][-0.25] [0][+4]
;o<pocket_circ> call [+1.181][-.394] [5.2/25.4] [0.1][-0.25] [0][+4]
;o<pocket_circ> call [-0.394][-.394] [5.2/25.4] [0.1][-0.25] [0][+4]
;o<pocket_circ> call [-1.181][-.394] [5.2/25.4] [0.1][-0.25] [0][+4]

F8
;o<pocket_circ> call [-.787][-1.181] [.551] [0.1][-0.25]
;o<pocket_circ> call [+.787][-1.181] [.551] [0.1][-0.25]


o<frame_circ> call [-.787][-1.181] [.553] [0.1][-0.25]
o<frame_circ> call [+.787][-1.181] [.553] [0.1][-0.25]


M30
M2 ; end program