; STEERING SOCKET PROGRAM - SC-0027
; Material: HDPE, Black (1.00" Thick)
; Tool 1: 0.25" Endmill (for profile and pocket)
; Tool 2: 0.4375" Drill (Pre-drill for 1/2-10 Acme)
; Tool 3: 0.323" Drill (N Drill)

#<_z_clearance> = 0.200
#<_depth>       = -1.050 

M03 ; Start spindle
F15       ; feed for HDPE

; --- OPERATION 1: OUTER PROFILE & U-SLOT ---
o<profile> sub
    G0 Z#<_z_clearance>
  G0 X0.5 Y0.2

	G41 D1
    G0 X0 Y0.2 
    G0 Z#1; Step down in increments if necessary
    
    F20

    G1 Y-0.515
    G1 X-0.1 Y-0.615
    G1 X-1.75
    G3 Y-2.385 R[1.77/2]
    G1 X-0.1
    G1 X0 Y-2.485
    G1 Y-3.1
    

    G0 Z#<_z_clearance>
    G40
o<profile> endsub

; --- OPERATION 2: DRILLING ---
;o<drilling> sub
    
    ; .323 Thru Hole (Center X1.5, Y0.5)
 ;   G0 X1.5 Y0.5

;o<drilling> endsub

G10 L1 P1 R[0.6/2]  ; Set tool 1 diameter to 0.125"
o<profile> call [-0.5]
;o<profile> call [-0.65]
o<profile> call [-1.05]
G10 L1 P1 R[0.515/2]  ; Set tool 1 diameter to 0.125"
o<profile> call [-1.1]

;M05
;M30
; --- OPERATION 3: LOCATE ACME TAP HOLE ---
;G0 Z#<_z_clearance>
;G0 X1.5 Y3.0
;(MSG, MANUALLY DRILL .375 AND TAP 1/2-10 ACME)
M00 ; Program Stop

M05 ; Stop Spindle
M30 ; End Program
%