G21  ; G21 mm / G20 inch
G54  ; absolute coordinates

#<_z_clearance> = 6
#<_rampang>     = 20

; mode refernce
; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside

F250  ; inch or mm/min (300 mm/min = about 1 ft/min)

o10 sub
	#<_z_top> = 1
	#<_z_bot> = -6
	o<pocket_circ> call [+4] [#1][-00] [10] [0.5]
	#<_z_top> = -5
	#<_z_bot> = -16
	o<drill> call [#1][-0]
	#<_z_top> = 1
	#<_z_bot> = -6
	o<pocket_circ> call [+4] [#1][-20] [10] [0.5]
	#<_z_top> = -5
	#<_z_bot> = -16
	o<drill> call [#1][-20]
o10 endsub

o10 call [-15]
o10 call [-20]
o10 call [-25]
o10 call [-30]

	#<_z_top> = -5
	#<_z_bot> = -16
	o<drill> call [-100][-0]
	#<_z_top> = -5
	#<_z_bot> = -16
	o<drill> call [-100][-20]

M2 ; end program