#<_z_clearance> = 1.0
#<_rampang>     = 5

;#<_overlap> = 0

; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside


G10 L1 P1 Z0.0 R[3/25.4 /2] ; set tool
T1   ; set tool to T1
M06  ; manual toolchange
G54  ; absolute coordinates
F2   ; feedrate

;o<pocket_circ> call [0.317][-0.508] [.165] [0.05][-0.18] [.00] [4]
;o<pocket_circ> call [1.183][-0.508] [.165] [0.05][-0.18] [.00] [4]

;o<pocket_circ> call [0.750][-0.508] [.130] [0.05][-0.18] [.00] [4]
;o<pocket_circ> call [0.750][-1.689] [.130] [0.05][-0.18] [.00] [4]
;o<pocket_circ> call [0.258][-1.492] [.130] [0.05][-0.18] [.00] [4]
;o<pocket_circ> call [1.242][-1.492] [.130] [0.05][-0.18] [.00] [4]

;o<pocket_circ> call [2.625][-1.000] [.200] [0.05][-0.18] [.00] [4]
;o<pocket_circ> call [4.000][-1.000] [.200] [0.05][-0.18] [.00] [4]

F5

#1 = -.010 ; finish cut
o<frame_rect> call [4.748+#1][-.265-#1] [5.578-#1][-1.735+#1] [0.05][-0.2]
;F5
;o<frame_rect> call [4.748][-.265] [5.578][-1.735] [0.05][-0.2]



M2 ; end program