#<_z_clearance> = 0.5
#<_rampang>     = 10
;#<_stepover>  = 0.1

;#<_overlap> = 0

; mode refernce
; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside


G20  ; G21 mm / G20 inch
G10 L1 P1 Z0.0 R[1/4/2] ; set tool
T1   ; set tool to T1
M06  ; manual toolchange
G54  ; absolute coordinates
F6  ; inch or mm/min (300 mm/min = about 1 ft/min)

#1 = 4

o1 if [#1 EQ 1]

; 12 mm holes
o<pocket_circ> call [.591] [-.433] [12/25.4] [0.1][-.1] [0][4]
o<pocket_circ> call [.591] [-.433] [12/25.4] [0.1][-.2] [0][4]
o<pocket_circ> call [.591] [-.433] [12/25.4] [0.1][-.3] [0][4]
o<pocket_circ> call [.591] [-.433] [12/25.4] [0.1][-.41] [0][4]

o<pocket_circ> call [.591] [-.984] [12/25.4] [0.1][-.1] [0][4]
o<pocket_circ> call [.591] [-.984] [12/25.4] [0.1][-.2] [0][4]
o<pocket_circ> call [.591] [-.984] [12/25.4] [0.1][-.3] [0][4]
o<pocket_circ> call [.591] [-.984] [12/25.4] [0.1][-.41] [0][4]


o<pocket_circ> call [3.937] [-.433] [12/25.4] [0.1][-.1] [0][4]
o<pocket_circ> call [3.937] [-.433] [12/25.4] [0.1][-.2] [0][4]
o<pocket_circ> call [3.937] [-.433] [12/25.4] [0.1][-.3] [0][4]
o<pocket_circ> call [3.937] [-.433] [12/25.4] [0.1][-.41] [0][4]


o<pocket_circ> call [3.937] [-.984] [12/25.4] [0.1][-.1] [0][4]
o<pocket_circ> call [3.937] [-.984] [12/25.4] [0.1][-.2] [0][4]
o<pocket_circ> call [3.937] [-.984] [12/25.4] [0.1][-.3] [0][4]
o<pocket_circ> call [3.937] [-.984] [12/25.4] [0.1][-.41] [0][4]

o1 elseif [#1 EQ 2]

#2 = [12/25.4]
o<frame_circ> call [.591]  [-.433] [#2] [0.1][-.41] [0][4]
o<frame_circ> call [.591]  [-.984] [#2] [0.1][-.41] [0][4]
o<frame_circ> call [3.937] [-.433] [#2] [0.1][-.41] [0][4]
o<frame_circ> call [3.937] [-.984] [#2] [0.1][-.41] [0][4]


o1 elseif [#1 EQ 3]
; m5 holes

o<drill_man> call [1.634] [-.315] 
o<drill_man> call [1.634] [-.709] 
o<drill_man> call [1.634] [-1.102]
o<drill_man> call [2.894] [-.315] 
o<drill_man> call [2.894] [-.709] 
o<drill_man> call [2.894] [-1.102]


o1 elseif [#1 EQ 4]
;top holes

o<drill_man> call [.197] [-.197] 
o<drill_man> call [1.870] [-.197] 
o<drill_man> call [2.657] [-.197] 
o<drill_man> call [4.331] [-.197] 
o<drill_man> call [4.528] [-.197] 



o1 endif


M2 ; end program