#<_z_clearance> = 1
#<_rampang>     = 10
;#<_stepover>  = 0.1

;#<_overlap> = 0

; mode refernce
; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside


G20  ; G21 mm / G20 inch
G54  ; absolute coordinates

#<op> = 2

#<_td> = 0.5
F12
	o<pocket_circ> call [-3.5][-.5] [2] [0.1][-0.4] [0.0]
	o<pocket_circ> call [-1.875][-.5] [0.52] [0.1][-0.4] [0.0]
	o<pocket_circ> call [-5.125][-.5] [0.52] [0.1][-0.4] [0.0]

	
F8

;o10 if [#<op> EQ 1]
o<drill> call [-.5][-.5] [0.1][-0.3]
;o<drill> call [-1.875][-.5] [0.1][-0.3]
;o<drill> call [-3.500][-.5] [0.1][-0.3]
;o<drill> call [-5.125][-.5] [0.1][-0.3]
o<drill> call [-7.750][-.5] [0.1][-0.3]
o<drill> call [-8.500][-.5] [0.1][-0.3]
o<drill> call [-9.250][-.5] [0.1][-0.3]
o<drill> call [-10.00][-.5] [0.1][-0.3]
o<drill> call [-10.75][-.5] [0.1][-0.3]
o<drill> call [-11.50][-.5] [0.1][-0.3]
;o10 elseif [#<op> EQ 2]
	
;o10 endif


M2 ; end program