G21  ; G21 mm / G20 inch
G54  ; absolute coordinates

#<_z_clearance> = 10
#<_rampang>     = 20
#<_td> = [3/16*25.4]

; mode refernce
; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside

F150  ; inch or mm/min (300 mm/min = about 1 ft/min)

#<zt> = +1
#<zb> = -10

;o<drill_man> call [ 5][-18]
;o<drill_man> call [45][-18]
;o<drill_man> call [68][-11]
;o<drill_man> call [68][-25]


;o<drill_man> call [ 5][-75+18]
;o<drill_man> call [45][-75+18]
;o<drill_man> call [68][-75+11]
;o<drill_man> call [68][-75+25]


;#<d> = 12.1
;o<pocket_circ> call [68][-11] [#<d>] [1][-5]    [.1]
;o<pocket_circ> call [68][-11] [#<d>] [-4][-10] [.1]
;o<pocket_circ> call [68][-25] [#<d>] [1][-5] [.1]
;o<pocket_circ> call [68][-25] [#<d>] [-4][-10] [.1]
;o<pocket_circ> call [68][-75+11] [#<d>] [1][-5] [.1]
;o<pocket_circ> call [68][-75+11] [#<d>] [-4][-10] [.1]
;o<pocket_circ> call [68][-75+25] [#<d>] [1][-5] [.1]
;o<pocket_circ> call [68][-75+25] [#<d>] [-4][-10] [.1]

o<drill_man> call [5][-5]
o<drill_man> call [5][-15]
o<drill_man> call [47][-5]
o<drill_man> call [47][-15]
o<drill_man> call [67][-5]
o<drill_man> call [67][-15]



M2 ; end program