#<_z_clearance> = 0.5
#<_rampang>     = 5
;#<_stepover>  = 0.1

;#<_overlap> = 0

; mode refernce
; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside


G20  ; G21 mm / G20 inch
G10 L1 P1 Z0.0 R[.1875/2] ; set tool
T1   ; set tool to T1
M06  ; manual toolchange
G54  ; absolute coordinates
F20  ; inch or mm/min (300 mm/min = about 1 ft/min)

o10 sub
o<pocket_circ> call [#1][#2] [.39] [0.05][-0.197]
o<drill>       call [#1][#2] [-.15][-0.5]
o10 endsub

o10 call [-22/25.4][-0.394]
o10 call [-22/25.4][-1.969]

o10 call [-10/25.4][-0.394]
o10 call [-10/25.4][-1.969]

o<face> call [-2.8][-2.4] [0][0] [0][0]

M2 ; end program