#<_z_clearance> = 0.5
#<_rampang>     = 5
;#<_stepover>  = 0.08

;#<_overlap> = 0

; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside


G20  ; G21 mm / G20 inch
G10 L1 P1 Z0.0 R.125 ; set tool
T1   ; set tool to T1
M06  ; manual toolchange
G54  ; absolute coordinates
;F5   ; inch or mm/min (300 mm/min = about 1 ft/min)

F4
o<drill_man> call [0.176][-.1875]      [0.05][-.787] [0.1]
o<drill_man> call [0.176][-.375-.1875] [0.05][-.787] [0.1]
o<drill_man> call [2.792][-.375-.1875] [0.05][-.787] [0.1]
o<drill_man> call [2.792][-.1875]      [0.05][-.787] [0.1]


M2 ; end program