G20  ; G21 mm / G20 inch
G54  ; absolute coordinates

#<_z_clearance> = 0.5
#<_rampang>     = 20

; mode refernce
; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside

F10  ; inch or mm/min (300 mm/min = about 1 ft/min)

o<drill_man> call [+.755][0]

;o<drill_man> call [+2.65/2][+2.65/2]
;o<drill_man> call [+2.65/2][-2.65/2]
;o<drill_man> call [-2.65/2][-2.65/2]
;o<drill_man> call [-2.65/2][+2.65/2]

;o<drill_man> call [2+.276][0]
;o<drill_man> call [2-.276][0]
o<drill_man> call [-2-.276][0]
o<drill_man> call [-2+.276][0]
;o<drill_man> call [-2+.276][1.5]
;o<drill_man> call [-2-.276][1.5]
;o<drill_man> call [-2-.276][-1.5]
;o<drill_man> call [-2+.276][-1.5]

M2 ; end program