#<_z_clearance> = 0.3
#<_rampang>     = 20

; mode refernce
; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside

G20  ; G21 mm / G20 inch
G10 L1 P1 Z0.0 R[1/8/2] ; set tool
T1   ; set tool to T1
M06  ; manual toolchange
G54  ; absolute coordinates
F12  ; inch or mm/min (300 mm/min = about 1 ft/min)

#<zt> = +0.1
#<zb> = -0.25

#<da> = [12/25.4]

#<_z_top> = #<zt>
#<_z_bot> = #<zb>
o<pocket_circ> call [4] [-0.394][+.787] [#<da>] [0]
#<_z_top> = #<zt>
#<_z_bot> = #<zb>
o<pocket_circ> call [4] [-1.181][+.787] [#<da>] [0]
#<_z_top> = #<zt>
#<_z_bot> = #<zb>
o<pocket_circ> call [4] [-1.181][-.787] [#<da>] [0]
#<_z_top> = #<zt>
#<_z_bot> = #<zb>
o<pocket_circ> call [4] [-0.394][-.787] [#<da>] [0]

#<_z_top> = #<zt>
#<_z_bot> = #<zb>
o<drill> call [-2.990][+1.480]
#<_z_top> = #<zt>
#<_z_bot> = #<zb>
o<drill> call [-1.769][+1.480]
#<_z_top> = #<zt>
#<_z_bot> = #<zb>
o<drill> call [-1.769][-1.480]
#<_z_top> = #<zt>
#<_z_bot> = #<zb>
o<drill> call [-2.990][-1.480]

#<_z_top> = #<zt>
#<_z_bot> = #<zb>
o<frame_rect> call [0] [-2.854][+1.417] [-1.870][-1.417]

M2 ; end program