#<_z_clearance> = 0.3
#<_rampang>     = 20

; mode refernce
; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside

G20  ; G21 mm / G20 inch
G10 L1 P1 Z0.0 R[5/32/2] ; set tool
T1   ; set tool to T1
M06  ; manual toolchange
G54  ; absolute coordinates
F15  ; inch or mm/min (300 mm/min = about 1 ft/min)

#<zt> = +0.05
#<zb> = -0.3

o<drill> call [0.375][-0.375] [#<zt>][#<zb>]
o<drill> call [0.375+132/25.4][-0.375] [#<zt>][#<zb>]
o<pocket_circ> call [0.375+132/25.4+28/25.4][-0.375] [0.28] [#<zt>][#<zb>]
o<pocket_circ> call [0.375+132/25.4+28/25.4+2.75][-0.375] [0.28] [#<zt>][#<zb>]

M2 ; end program