#<_z_clearance> = 0.4
#<_rampang>     = 5

; mode reference
; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside


G20  ; G21 mm, G20 inches
G10 L1 P1 Z0.0 R[.1875/2] ; set tool
T1   ; set tool to T1
M06  ; manual toolchange
G54  ; absolute coordinates
;F10  ; mm/min (300 mm/min = about 1 ft/min)

;#<_z_top> = .1
;#<_z_bot> = -.5
;o<pocket_circ> call [0+4] [0][0] [2.05] [.01]
;#<_z_top> = .1
;#<_z_bot> = -.5
;o<frame_circ> call [0] [0][0] [2.055] [0]

F3
;#<_z_top> = 0.1
;#<_z_bot> = -0.25
;o<pocket_circ> call [+4] [+0.394][-.394] [5.2/25.4] [0]
;#<_z_top> = 0.1
;#<_z_bot> = -0.25
;o<pocket_circ> call [+4] [+1.181][-.394] [5.2/25.4] [0]
;#<_z_top> = 0.1
;#<_z_bot> = -0.25
;o<pocket_circ> call [+4] [-0.394][-.394] [5.2/25.4] [0]
;#<_z_top> = 0.1
;#<_z_bot> = -0.25
;o<pocket_circ> call [+4] [-1.181][-.394] [5.2/25.4] [0]

F8
;#<_z_top> = 0.1
;#<_z_bot> = -0.25
;o<pocket_circ> call [0] [-.787][-1.181] [.551]
;#<_z_top> = 0.1
;#<_z_bot> = -0.25
;o<pocket_circ> call [0] [+.787][-1.181] [.551]


#<_z_top> = 0.1
#<_z_bot> = -0.25
o<frame_circ> call [0] [-.787][-1.181] [.553]
#<_z_top> = 0.1
#<_z_bot> = -0.25
o<frame_circ> call [0] [+.787][-1.181] [.553]


M30
M2 ; end program