#<_z_clearance> = 0.4
#<_rampang>     = 5

;#<_overlap> = 0

; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside


G10 L1 P1 Z0.0 R0.25 ; set tool
T1   ; set tool to T1
M06  ; manual toolchange
G54  ; absolute coordinates
F10  ; 10 ft/min

#1 = 1

o10 if [#1 EQ 1]
	#<_z_top> = 0.1
	#<_z_bot> = -0.3
	o<drill> call [ .325][-.25]
	#<_z_top> = 0.1
	#<_z_bot> = -0.3
	o<drill> call [ .325][-3.0]
	#<_z_top> = 0.1
	#<_z_bot> = -0.3
	o<drill> call [7.675][-3.0]
	#<_z_top> = 0.1
	#<_z_bot> = -0.3
	o<drill> call [7.675][-.25]
o10 else if [#1 EQ 2]
	#<_z_top> = 0.1
	#<_z_bot> = -0.3
	o<drill> call [1.4][-.75]
	#<_z_top> = 0.1
	#<_z_bot> = -0.3
	o<drill> call [4.0][-.75]
	#<_z_top> = 0.1
	#<_z_bot> = -0.3
	o<drill> call [4.0][-2.5]
	#<_z_top> = 0.1
	#<_z_bot> = -0.3
	o<drill> call [1.4][-2.5]

	#<_z_top> = 0.1
	#<_z_bot> = -0.3
	o<drill> call [5.4][-.525]
	#<_z_top> = 0.1
	#<_z_bot> = -0.3
	o<drill> call [6.4][-2.725]
o10 endif


M2 ; end program