#<_z_clearance> = 0.4
#<_rampang>     = 5

; mode reference
; +1: Conventional milling
; +2: Both-ways milling
; +4: Plunge entry
; +8: Outside


G20  ; G21 mm, G20 inches
G10 L1 P1 Z0.0 R[.323/2] ; set tool
T1   ; set tool to T1
M06  ; manual toolchange
G54  ; absolute coordinates
F4   ; mm/min (300 mm/min = about 1 ft/min)

o<drill> call [5-3][-1] [.1][-.7] [.2]
o<drill> call [8-3][-1] [.1][-.7] [.2]
o<drill> call [5-3][-3] [.1][-.7] [.2]
o<drill> call [8-3][-3] [.1][-.7] [.2]

M30
M2 ; end program