?

nc_files/programs/psw_fin.ngc

@@ -0,0 +1,65 @@
+%
+(PSW_FIN)
+(T1 D=0.25 CR=0. - ZMIN=-0.52 - FLAT END MILL)
+N10 G90 G94 G17 G91.1
+N15 G20
+(WHEN USING FUSION FOR PERSONAL USE, THE FEEDRATE OF RAPID)
+(MOVES IS REDUCED TO MATCH THE FEEDRATE OF CUTTING MOVES,)
+(WHICH CAN INCREASE MACHINING TIME. UNRESTRICTED RAPID MOVES)
+(ARE AVAILABLE WITH A FUSION SUBSCRIPTION.)
+N20 G53 G0 Z0.
+(2D CONTOUR1)
+N25 T1 M6
+N30 S3000 M3
+N35 G17 G90 G94
+N40 G54
+N45 G64 P0.0004 Q0.0004
+N50 M8
+N55 G0 X0.1761 Y-0.2114
+N60 G43 Z0.6 H1
+N65 G1 Z0.2 F12.
+N70 Z0.0394 F6.
+N75 Z-0.495
+N80 X0.1763 Y-0.2116 Z-0.4989 F10.
+N85 X0.1769 Y-0.2123 Z-0.5027
+N90 X0.178 Y-0.2134 Z-0.5063
+N95 X0.1794 Y-0.2148 Z-0.5097
+N100 X0.1812 Y-0.2166 Z-0.5127
+N105 X0.1834 Y-0.2187 Z-0.5152
+N110 X0.1857 Y-0.2211 Z-0.5173
+N115 X0.1883 Y-0.2236 Z-0.5188
+N120 X0.191 Y-0.2263 Z-0.5197
+N125 X0.1937 Y-0.2291 Z-0.52
+N130 X0.2114 Y-0.2468
+N135 G3 X0.2468 I0.0177 J0.0177
+N140 G1 X0.457 Y-0.0366 F12.
+N145 G2 X0.5453 Y0. I0.0884 J-0.0884
+N150 X0.457 Y0.0366 I0. J0.125
+N155 G1 X0.0366 Y0.457
+N160 G2 X0. Y0.5453 I0.0884 J0.0884
+N165 X-0.0366 Y0.457 I-0.125 J0.
+N170 G1 X-0.457 Y0.0366
+N175 G2 X-0.5453 Y0. I-0.0884 J0.0884
+N180 X-0.457 Y-0.0366 I0. J-0.125
+N185 G1 X-0.0366 Y-0.457
+N190 G2 X0. Y-0.5453 I-0.0884 J-0.0884
+N195 X0.0366 Y-0.457 I0.125 J0.
+N200 G1 X0.2468 Y-0.2468
+N205 G3 Y-0.2114 I-0.0177 J0.0177 F10.
+N210 G1 X0.2291 Y-0.1937
+N215 X0.2263 Y-0.191 Z-0.5197
+N220 X0.2236 Y-0.1883 Z-0.5188
+N225 X0.2211 Y-0.1857 Z-0.5173
+N230 X0.2187 Y-0.1834 Z-0.5152
+N235 X0.2166 Y-0.1812 Z-0.5127
+N240 X0.2148 Y-0.1794 Z-0.5097
+N245 X0.2134 Y-0.178 Z-0.5063
+N250 X0.2123 Y-0.1769 Z-0.5027
+N255 X0.2116 Y-0.1763 Z-0.4989
+N260 X0.2114 Y-0.1761 Z-0.495
+N265 Z0.6 F12.
+N270 M5
+N275 M9
+N280 G53 G0 Z0.
+N285 M30
+%