?

nc_files/programs/SPW_HOLDER_TWEAKED.ngc

@@ -0,0 +1,306 @@
+%
+(SPW_HOLDER)
+(T1 D=0.25 CR=0. - ZMIN=-0.75 - FLAT END MILL)
+N10 G90 G94 G17 G91.1
+N15 G20
+(WHEN USING FUSION FOR PERSONAL USE, THE FEEDRATE OF RAPID)
+(MOVES IS REDUCED TO MATCH THE FEEDRATE OF CUTTING MOVES,)
+(WHICH CAN INCREASE MACHINING TIME. UNRESTRICTED RAPID MOVES)
+(ARE AVAILABLE WITH A FUSION SUBSCRIPTION.)
+N20 G54 G0 Z0.6
+(2D CONTOUR1)
+N25 T1 M6
+N30 S5000 M3
+N35 G17 G90 G94
+(N40 G54)
+N45 G64 P0.0004 Q0.0004
+N50 M8
+N55 G0 X-1.7104 Y-2.8578
+N60 G43 Z0.9 H1
+N65 G0 Z0.575
+N70 G0 Z0.1144
+N75 G1 F40. Z-0.175
+N80 X-1.6959 Y-2.81 F30.
+N85 G3 X-1.7292 Y-2.7476 I-0.0478 J0.0145
+N90 G1 X-1.8249 Y-2.7185
+N95 G2 X-2.4878 Y-2.1921 I0.3349 J1.1025
+N100 G3 X-3.2259 Y-1.766 I-0.7381 J-0.4261
+N105 G1 X-3.6634
+N110 G2 X-4.7294 Y-0.7 I0. J1.066
+N115 G1 Y0.7
+N120 G2 X-3.6634 Y1.766 I1.066 J0.
+N125 G1 X-3.2259
+N130 G3 X-2.4878 Y2.1921 I0. J0.8523
+N135 G2 X-1.8249 Y2.7185 I0.9979 J-0.5761
+N140 G1 X-1.7292 Y2.7476
+N145 G3 X-1.6959 Y2.81 I-0.0145 J0.0478
+N150 G1 X-1.7104 Y2.8578
+N155 G0 Z0.575
+N160 Y-2.8578
+N165 G1 Z-0.1356 F40.
+N170 Z-0.51
+N175 X-1.6959 Y-2.81 F30.
+N180 G3 X-1.7292 Y-2.7476 I-0.0478 J0.0145
+N185 G1 X-1.8249 Y-2.7185
+N190 G2 X-2.4878 Y-2.1921 I0.3349 J1.1025
+N195 G3 X-3.2259 Y-1.766 I-0.7381 J-0.4261
+N200 G1 X-3.6634
+N205 G2 X-4.7294 Y-0.7 I0. J1.066
+N210 G1 Y0.7
+N215 G2 X-3.6634 Y1.766 I1.066 J0.
+N220 G1 X-3.2259
+N225 G3 X-2.4878 Y2.1921 I0. J0.8523
+N230 G2 X-1.8249 Y2.7185 I0.9979 J-0.5761
+N235 G1 X-1.7292 Y2.7476
+N240 G3 X-1.6959 Y2.81 I-0.0145 J0.0478
+N245 G1 X-1.7104 Y2.8578
+N250 G0 Z0.575
+N255 Y-2.8578
+N355 G1 Z-0.6356 F40.
+N360 Z-0.75
+N365 X-1.6959 Y-2.81 F30.
+N370 G3 X-1.7292 Y-2.7476 I-0.0478 J0.0145
+N375 G1 X-1.8249 Y-2.7185
+N380 G2 X-2.4878 Y-2.1921 I0.3349 J1.1025
+N385 G3 X-3.2259 Y-1.766 I-0.7381 J-0.4261
+N390 G1 X-3.6634
+N395 G2 X-4.7294 Y-0.7 I0. J1.066
+N400 G1 Y0.7
+N405 G2 X-3.6634 Y1.766 I1.066 J0.
+N410 G1 X-3.2259
+N415 G3 X-2.4878 Y2.1921 I0. J0.8523
+N420 G2 X-1.8249 Y2.7185 I0.9979 J-0.5761
+N425 G1 X-1.7292 Y2.7476
+N430 G3 X-1.6959 Y2.81 I-0.0145 J0.0478
+N435 G1 X-1.7104 Y2.8578
+N440 G0 Z0.575
+N445 X-1.7031 Y-2.8339
+N450 G1 Z-0.6356 F40.
+N455 Z-0.75
+N460 X-1.6886 Y-2.786 F20.
+N465 G3 X-1.7219 Y-2.7237 I-0.0478 J0.0145
+N470 G1 X-1.8176 Y-2.6946
+N475 G2 X-2.4662 Y-2.1796 I0.3277 J1.0786
+N480 G3 X-3.2259 Y-1.741 I-0.7597 J-0.4386
+N485 G1 X-3.6634
+N490 G2 X-4.7044 Y-0.7 I0. J1.041
+N495 G1 Y0.7
+N500 G2 X-3.6634 Y1.741 I1.041 J0.
+N505 G1 X-3.2259
+N510 G3 X-2.4662 Y2.1796 I0. J0.8773
+N515 G2 X-1.8176 Y2.6946 I0.9762 J-0.5636
+N520 G1 X-1.7219 Y2.7237
+N525 G3 X-1.6886 Y2.786 I-0.0145 J0.0478
+N530 G1 X-1.7031 Y2.8339
+N535 G0 Z0.9
+(WHEN USING FUSION FOR PERSONAL USE, THE FEEDRATE OF RAPID)
+(MOVES IS REDUCED TO MATCH THE FEEDRATE OF CUTTING MOVES,)
+(WHICH CAN INCREASE MACHINING TIME. UNRESTRICTED RAPID MOVES)
+(ARE AVAILABLE WITH A FUSION SUBSCRIPTION.)
+(2D CONTOUR1 2)
+N540 G0 X3.7812 Y2.725
+N545 G0 Z0.9
+N550 Z0.575
+N555 Z0.1144
+N560 G1 Z-0.180 F40.
+N565 X3.7312 F30.
+N570 G3 X3.6812 Y2.675 I0. J-0.05
+N575 G1 Y1.9213
+N580 G3 X3.8366 Y1.766 I0.1553 J0.
+N585 G1 X4.2741
+N590 G2 X4.7294 Y1.3107 I0. J-0.4553
+N595 G1 Y-1.3107
+N600 G2 X4.2741 Y-1.766 I-0.4553 J0.
+N605 G1 X3.8366
+N610 G3 X3.6812 Y-1.9213 I0. J-0.1553
+N615 G1 Y-2.575
+N620 Y-2.675
+N625 G3 X3.7312 Y-2.725 I0.05 J0.
+N630 G1 X3.7812
+N635 G0 Z0.575
+N640 Y2.725
+N645 G1 Z-0.1356 F40.
+N650 Z-0.51
+N655 X3.7312 F30.
+N660 G3 X3.6812 Y2.675 I0. J-0.05
+N665 G1 Y1.9213
+N670 G3 X3.8366 Y1.766 I0.1553 J0.
+N675 G1 X4.2741
+N680 G2 X4.7294 Y1.3107 I0. J-0.4553
+N685 G1 Y-1.3107
+N690 G2 X4.2741 Y-1.766 I-0.4553 J0.
+N695 G1 X3.8366
+N700 G3 X3.6812 Y-1.9213 I0. J-0.1553
+N705 G1 Y-2.575
+N710 Y-2.675
+N715 G3 X3.7312 Y-2.725 I0.05 J0.
+N720 G1 X3.7812
+N725 G0 Z0.575
+N730 Y2.725
+N825 G1 Z-0.6356 F40.
+N830 Z-0.75
+N835 X3.7312 F30.
+N840 G3 X3.6812 Y2.675 I0. J-0.05
+N845 G1 Y1.9213
+N850 G3 X3.8366 Y1.766 I0.1553 J0.
+N855 G1 X4.2741
+N860 G2 X4.7294 Y1.3107 I0. J-0.4553
+N865 G1 Y-1.3107
+N870 G2 X4.2741 Y-1.766 I-0.4553 J0.
+N875 G1 X3.8366
+N880 G3 X3.6812 Y-1.9213 I0. J-0.1553
+N885 G1 Y-2.575
+N890 Y-2.675
+N895 G3 X3.7312 Y-2.725 I0.05 J0.
+N900 G1 X3.7812
+N905 G0 Z0.575
+N910 X3.7562 Y2.725
+N915 G1 Z-0.6356 F40.
+N920 Z-0.75
+N925 X3.7062 F20.
+N930 G3 X3.6562 Y2.675 I0. J-0.05
+N935 G1 Y1.9213
+N940 G3 X3.8366 Y1.741 I0.1803 J0.
+N945 G1 X4.2741
+N950 G2 X4.7044 Y1.3107 I0. J-0.4303
+N955 G1 Y-1.3107
+N960 G2 X4.2741 Y-1.741 I-0.4303 J0.
+N965 G1 X3.8366
+N970 G3 X3.6562 Y-1.9213 I0. J-0.1803
+N975 G1 Y-2.575
+N980 Y-2.675
+N985 G3 X3.7062 Y-2.725 I0.05 J0.
+N990 G1 X3.7562
+N995 G0 Z0.9
+(WHEN USING FUSION FOR PERSONAL USE, THE FEEDRATE OF RAPID)
+(MOVES IS REDUCED TO MATCH THE FEEDRATE OF CUTTING MOVES,)
+(WHICH CAN INCREASE MACHINING TIME. UNRESTRICTED RAPID MOVES)
+(ARE AVAILABLE WITH A FUSION SUBSCRIPTION.)
+(2D CONTOUR2)
+N1000 G0 X3.1762 Y-2.675
+N1005 G0 Z0.775
+N1010 G0 Z0.275
+N1015 Z0.1144
+N1020 G1 Z-0.125 F40.
+N1025 Y-0.6 F30.
+N1030 X3.1562
+N1035 Y-2.575
+N1040 Y-2.675
+N1045 X3.1762
+N1050 Z-0.29 F40.
+N1055 Y-0.6 F30.
+N1060 X3.1562
+N1065 Y-2.575
+N1070 Y-2.675
+N1075 G0 Z0.375
+N1080 X3.1762 Y0.6
+N1085 Z0.275
+N1090 Z0.1144
+N1095 G1 Z-0.125 F40.
+N1100 Y2.575 F30.
+N1105 Y2.675
+N1110 X3.1562
+N1115 Y0.6
+N1120 X3.1762
+N1125 Z-0.29 F40.
+N1130 Y2.575 F30.
+N1135 Y2.675
+N1140 X3.1562
+N1145 Y0.6
+N1150 G0 Z0.775
+(WHEN USING FUSION FOR PERSONAL USE, THE FEEDRATE OF RAPID)
+(MOVES IS REDUCED TO MATCH THE FEEDRATE OF CUTTING MOVES,)
+(WHICH CAN INCREASE MACHINING TIME. UNRESTRICTED RAPID MOVES)
+(ARE AVAILABLE WITH A FUSION SUBSCRIPTION.)
+(FACE1)
+N1155 G0 X3.6687 Y-2.5109
+N1165 G0 Z0.2
+N1170 G1 Z0. F40.
+N1175 X3.6566 F40.
+N1180 X-2.2569
+N1185 G0 Z0.075
+N1190 X-4.7147 Y-0.7653
+N1195 G1 Z0. F40.
+N1200 X-4.7048 F40.
+N1205 X4.7048
+N1210 G0 Z0.075
+N1215 X3.6687 Y-2.3238
+N1220 G1 Z0. F40.
+N1225 X3.6566 F40.
+N1230 X-2.4305
+N1235 G0 Z0.075
+N1240 X-4.6955 Y-0.9537
+N1245 G1 Z0. F40.
+N1250 X4.7048 F40.
+N1255 G0 Z0.075
+N1260 X3.6687 Y-2.1367
+N1265 G1 Z0. F40.
+N1270 X3.6566 F40.
+N1275 X-2.5536
+N1280 G0 Z0.075
+N1285 X-4.648 Y-1.142
+N1290 G1 Z0. F40.
+N1295 X4.7048 F40.
+N1300 G0 Z0.075
+N1305 X3.6726 Y-1.9496
+N1310 G1 Z0. F40.
+N1315 X-2.7393 F40.
+N1320 G0 Z0.075
+N1325 X-4.5527 Y-1.3304
+N1330 G1 Z0. F40.
+N1335 X4.7048 F40.
+N1340 G0 Z0.075
+N1345 X3.8499 Y-1.7625
+N1350 G1 Z0. F40.
+N1355 X-3.1456 F40.
+N1360 X-4.3868 Y-1.5187
+N1365 X4.6932
+N1370 G0 Z0.075
+N1375 X4.7169 Y0.7641
+N1380 G1 Z0. F40.
+N1385 X4.7048 F40.
+N1390 X-4.7048
+N1395 G0 Z0.075
+N1400 X-2.2584 Y2.5096
+N1405 G1 Z0. F40.
+N1410 X3.6566 F40.
+N1415 G0 Z0.075
+N1420 X4.7169 Y0.9512
+N1425 G1 Z0. F40.
+N1430 X4.7048 F40.
+N1435 X-4.6959
+N1440 G0 Z0.075
+N1445 X-2.4323 Y2.3213
+N1450 G1 Z0. F40.
+N1455 X3.6566 F40.
+N1460 G0 Z0.075
+N1465 X4.7169 Y1.1383
+N1470 G1 Z0. F40.
+N1475 X4.7048 F40.
+N1480 X-4.6494
+N1485 G0 Z0.075
+N1490 X-2.5565 Y2.1329
+N1495 G1 Z0. F40.
+N1500 X3.6566 F40.
+N1505 G0 Z0.075
+N1510 X4.7165 Y1.3254
+N1515 G1 Z0. F40.
+N1520 X4.7048 F40.
+N1525 X-4.556
+N1530 G0 Z0.075
+N1535 X-2.746 Y1.9446
+N1540 G1 Z0. F40.
+N1545 X3.6742 F40.
+N1550 G0 Z0.075
+N1555 X4.6948 Y1.7562
+N1560 G1 Z0. F40.
+N1565 X-3.2 F40.
+N1570 X-4.4 Y1.5125
+N1575 X4.473
+N1580 Z0.475
+N1585 M5
+N1590 M9
+N1595 G0 Z0.6
+N1596 G0 X-3 Y-3
+N1600 M30
+%