?

nc_files/programs/HECB-ENCLOSURE-TOP.cnc

@@ -0,0 +1,35 @@
+#<_z_clearance> = 0.3
+#<_rampang>     = 20
+
+; mode refernce
+; +1: Conventional milling
+; +2: Both-ways milling
+; +4: Plunge entry
+; +8: Outside
+
+G20  ; G21 mm / G20 inch
+G10 L1 P1 Z0.0 R[5/32/2] ; set tool
+T1   ; set tool to T1
+M06  ; manual toolchange
+G54  ; absolute coordinates
+F15  ; inch or mm/min (300 mm/min = about 1 ft/min)
+
+#<zt> = +0.1
+#<zb> = -0.2
+
+#<da> = .250
+
+o<pocket_circ> call [-2.250][+.984] [#<da>] [#<zt>][#<zb>]
+o<pocket_circ> call [-2.742][+.197] [#<da>] [#<zt>][#<zb>]
+o<pocket_circ> call [-1.758][-.197] [#<da>] [#<zt>][#<zb>]
+o<pocket_circ> call [-2.250][-.984] [#<da>] [#<zt>][#<zb>]
+
+o<drill> call [0.571][-0.151] [#<zt>][#<zb>]
+o<drill> call [2.511][-0.151] [#<zt>][#<zb>]
+o<drill> call [1.225][-1.997] [#<zt>][#<zb>]
+o<drill> call [2.520][-2.426] [#<zt>][#<zb>]
+
+o<frame_rect> call [.723][.307] [2.360][-.609] [#<zt>][#<zb>] [0] [.250]
+o<frame_rect> call [1.377][-1.567] [2.368][-2.426] [#<zt>][#<zb>] [0] [.250]
+
+M2 ; end program