?

nc_files/SC-0027-V2

@@ -0,0 +1,50 @@
+; STEERING SOCKET PROGRAM - SC-0027
+; Material: HDPE, Black (1.00" Thick)
+; Tool 1: 0.25" Endmill (for profile and pocket)
+; Tool 2: 0.4375" Drill (Pre-drill for 1/2-10 Acme)
+; Tool 3: 0.323" Drill (N Drill)
+
+#<_z_clearance> = 0.200
+#<_depth>       = -1.050 
+
+G20 ; Inches
+G90 ; Absolute positioning
+M03 ; Start spindle
+F15       ; feed for HDPE
+
+; --- OPERATION 1: OUTER PROFILE & U-SLOT ---
+o<profile> sub
+    G0 Z#<_z_clearance>
+    G0 X0 Y0 
+    G1 Z-0.25 F10 ; Step down in increments if necessary
+    G1 X0 Y3.0 
+    G1 X3.0 Y3.0
+    G1 X3.0 Y0
+    G1 X2.385 Y0 ; Move to start of U-opening (3.0 - 1.770)/2 = 0.615 from edge
+    G1 X2.385 Y1.75
+    G3 X0.615 Y1.75 R0.885 ; The 1.770 wide arc (Radius = 0.885)
+    G1 X0.615 Y0
+    G1 X0 Y0
+    G0 Z#<_z_clearance>
+o<profile> endsub
+
+; --- OPERATION 2: DRILLING ---
+o<drilling> sub
+    
+    ; .323 Thru Hole (Center X1.5, Y0.5)
+    G0 X1.5 Y0.5
+
+o<drilling> endsub
+
+o<profile> call
+M05
+M30
+; --- OPERATION 3: LOCATE ACME TAP HOLE ---
+G0 Z#<_z_clearance>
+G0 X1.5 Y3.0
+(MSG, MANUALLY DRILL .375 AND TAP 1/2-10 ACME)
+M00 ; Program Stop
+
+M05 ; Stop Spindle
+M30 ; End Program
+%