?

nc_files/HEMS/HEMS-0003.cnc

@@ -0,0 +1,59 @@
+#<_z_clearance> = 0.5
+#<_rampang>     = 5
+;#<_stepover>  = 0.08
+
+;#<_overlap> = 0
+
+; +1: Conventional milling
+; +2: Both-ways milling
+; +4: Plunge entry
+; +8: Outside
+
+
+G20  ; G21 mm / G20 inch
+G10 L1 P1 Z0.0 R.125 ; set tool
+T1   ; set tool to T1
+M06  ; manual toolchange
+G54  ; absolute coordinates
+;F5   ; inch or mm/min (300 mm/min = about 1 ft/min)
+
+#<prog> = 3
+
+#<w>    = 3.0
+#<bolt_r> = [40/25.4]
+
+
+o10 if [#<prog> EQ 1]
+	F3
+	o<drill_man> call [#<w>/2][-#<w>/2] [0.1][-0.5]
+
+	o<drill_man> call [#<w>/2+#<bolt_r>/SQRT[2]][-#<w>/2+#<bolt_r>/SQRT[2]] [0.1][-0.5]
+	o<drill_man> call [#<w>/2+#<bolt_r>/SQRT[2]][-#<w>/2-#<bolt_r>/SQRT[2]] [0.1][-0.5]
+	o<drill_man> call [#<w>/2-#<bolt_r>/SQRT[2]][-#<w>/2-#<bolt_r>/SQRT[2]] [0.1][-0.5]
+	o<drill_man> call [#<w>/2-#<bolt_r>/SQRT[2]][-#<w>/2+#<bolt_r>/SQRT[2]] [0.1][-0.5]
+	
+
+o10 elseif [#<prog> EQ 2]
+	F8
+	; exterior
+	o<spquircle_boss> call [#<w>/2][-#<w>/2] [#<w>][40/25.4] [0.02] [-0.125] [0.01]
+
+	; center pocket
+	o<spquircle_pocket> call [#<w>/2][-#<w>/2] [.937] [0.02][-.19] [0.01] [0]
+	o<spquircle_pocket> call [#<w>/2][-#<w>/2] [.937] [-.19][-.45] [0.01] [+4]
+	
+	; cleanup the corners
+	o<drill> call [#<w>/2+.38][-#<w>/2+.38] [0.02][-0.45]
+	o<drill> call [#<w>/2-.38][-#<w>/2+.38] [0.02][-0.45]
+	o<drill> call [#<w>/2-.38][-#<w>/2-.38] [0.02][-0.45]
+	o<drill> call [#<w>/2+.38][-#<w>/2-.38] [0.02][-0.45]
+
+o10 elseif [#<prog> EQ 3]
+	F10
+	#<b> = .96
+	o<frame_rect> call [#<w>/2+#<b>/2][-#<w>/2+#<b>/2] [#<w>/2-#<b>/2][-#<w>/2-#<b>/2] [0.02][-.45]
+
+o10 endif
+
+
+M2 ; end program