43 lines
2.2 KiB
Plaintext
43 lines
2.2 KiB
Plaintext
Raw serial log : logtool/rtc_raw_20260310_134529.txt
|
|
Analysis log : logtool/rtc_analysis_20260310_134529.txt
|
|
|
|
[1] Opening COM3 at 115200 baud and resetting board...
|
|
EN pulsed. Waiting for boot prompt... OK
|
|
|
|
Multi-cycle mode: 30 cycles x 120s = ~60 min
|
|
|
|
|
|
[INIT] Syncing device RTC to 1773168335 (2026-03-10 18:45:35 UTC)...
|
|
OK
|
|
|
|
[INIT] Baseline RTCDEBUG:
|
|
device_t0 : 1773168335 (2026-03-10 18:45:35 UTC)
|
|
host_t0 : 1773168336 (2026-03-10 18:45:36 UTC)
|
|
slow_clk_src : XTAL32K (OK)
|
|
crystal_ok : True
|
|
clock_offset : 1773168331s (should stay near-constant if clock tracks correctly)
|
|
|
|
Starting 30 cycles x ~175s = ~87 min
|
|
ETA: 13:45 + 87m (finish ~15:13)
|
|
Clock will NOT be re-synced -- drift accumulates intentionally.
|
|
|
|
|
|
Cycle Host time (UTC) Device time (UTC) CycDrift CumDrift Rate s/hr XTAL Notes
|
|
----- ------------------- ------------------- --------- --------- ---------- ------- -----
|
|
|
|
[sleep] Sending sleep command at 13:45:36.371...
|
|
[wait] 105s countdown (cycle 1/30, from 13:45:41, device wakes ~15s after countdown ends) 105s 100s 95s 90s 85s 80s 75s 70s 65s 60s 55s 50s 45s 40s 35s 30s 25s 20s 15s 10s 5s
|
|
[wake] Listening for boot prompt (up to 55s)...
|
|
No prompt after wait -- performing controlled board reset (port stays open)...
|
|
NOTE: reset_reason will be POWER_ON for this cycle, not DEEP_SLEEP.
|
|
1 2026-03-10 18:48:24 1970-01-01 00:00:01 -1773168502s -1773168502s -37996467900.0 OK reason=POWER_ON offset_chg=-1773168331s
|
|
|
|
[sleep] Sending sleep command at 13:48:24.581...
|
|
[wait] 105s countdown (cycle 2/30, from 13:48:29, device wakes ~15s after countdown ends) 105s 100s 95s 90s 85s 80s 75s 70s 65s 60s 55s 50s 45s 40s 35s 30s 25s 20s 15s 10s 5s
|
|
[wake] Listening for boot prompt (up to 55s)...
|
|
No prompt after wait -- performing controlled board reset (port stays open)...
|
|
NOTE: reset_reason will be POWER_ON for this cycle, not DEEP_SLEEP.
|
|
WARNING: RTCDEBUG parse failed on cycle 2 -- skipping
|
|
|
|
[sleep] Sending sleep command at 13:51:14.819...
|
|
[wait] 105s countdown (cycle 3/30, from 13:51:19, device wakes ~15s after countdown ends) 105s 100s 95s 90s 85s 80s 75s |