673 lines
22 KiB
C
673 lines
22 KiB
C
/*
|
|
* bringup.c — manufacturing / bench bring-up procedure over UART.
|
|
*
|
|
* Line protocol specified in docs/SC-F001/BRINGUP.md §3.
|
|
* All responses are written with printf() so they share the UART stream
|
|
* with uart_comms; keep every line short and grep-friendly.
|
|
*
|
|
* Distinct from the per-module POST routines (adc_post, i2c_post, ...) that
|
|
* run on every boot — those are the actual power-on self-tests.
|
|
*/
|
|
|
|
#include "bringup.h"
|
|
#include "board_config.h"
|
|
#include "control_fsm.h"
|
|
#include "i2c.h"
|
|
#include "power_mgmt.h"
|
|
#include "rf_433.h"
|
|
#include "sensors.h"
|
|
#include "solar.h"
|
|
#include "storage.h"
|
|
#include "version.h"
|
|
#include "webserver.h"
|
|
|
|
#include "esp_err.h"
|
|
#include "esp_log.h"
|
|
#include "esp_partition.h"
|
|
#include "esp_system.h"
|
|
#include "esp_task_wdt.h"
|
|
#include "esp_timer.h"
|
|
#include "esp_wifi.h"
|
|
#include "driver/gpio.h"
|
|
#include "driver/uart.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
|
|
#include <math.h>
|
|
#include <stdarg.h>
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include <strings.h>
|
|
|
|
#define TAG "BRINGUP"
|
|
|
|
static bool s_active = false;
|
|
static int64_t s_start_us = 0;
|
|
static volatile int s_http_reqs = 0;
|
|
|
|
/* -------- state helpers -------- */
|
|
|
|
bool bringup_mode_is_active(void) { return s_active; }
|
|
|
|
void bringup_notify_http_request(void) { s_http_reqs++; }
|
|
|
|
void bringup_mode_enter(void)
|
|
{
|
|
extern relay_port_t last_relay_state;
|
|
s_active = true;
|
|
s_start_us = esp_timer_get_time();
|
|
s_http_reqs = 0;
|
|
/* All bridges off, sensor rail (P10) up — system is still on. */
|
|
relay_port_t idle = {.bridges = {.SENSORS = 1}};
|
|
last_relay_state = idle;
|
|
i2c_relays_idle();
|
|
}
|
|
|
|
void bringup_mode_exit(void)
|
|
{
|
|
extern relay_port_t last_relay_state;
|
|
s_active = false;
|
|
relay_port_t idle = {.bridges = {.SENSORS = 1}};
|
|
last_relay_state = idle;
|
|
i2c_relays_idle();
|
|
}
|
|
|
|
static float elapsed_s(void)
|
|
{
|
|
return (esp_timer_get_time() - s_start_us) / 1e6f;
|
|
}
|
|
|
|
/* -------- output helpers -------- */
|
|
|
|
__attribute__((format(printf, 2, 3)))
|
|
static void emit(const char *kind, const char *fmt, ...)
|
|
{
|
|
printf("BU.%s ", kind);
|
|
va_list ap;
|
|
va_start(ap, fmt);
|
|
vprintf(fmt, ap);
|
|
va_end(ap);
|
|
printf("\n");
|
|
fflush(stdout);
|
|
}
|
|
|
|
#define OK(fmt, ...) emit("OK", fmt, ##__VA_ARGS__)
|
|
#define ERR(fmt, ...) emit("ERR", fmt, ##__VA_ARGS__)
|
|
#define SKIP(fmt, ...) emit("SKIP", fmt, ##__VA_ARGS__)
|
|
#define EVT(fmt, ...) emit("EVENT", fmt, ##__VA_ARGS__)
|
|
|
|
/* -------- tokenizer -------- */
|
|
|
|
/* strsep-style: mutate s in place, return next token (no quotes handled). */
|
|
static char *next_tok(char **s)
|
|
{
|
|
if (!s || !*s) return NULL;
|
|
while (**s == ' ' || **s == '\t') (*s)++;
|
|
if (**s == '\0') return NULL;
|
|
char *start = *s;
|
|
while (**s && **s != ' ' && **s != '\t') (*s)++;
|
|
if (**s) { *(*s)++ = '\0'; }
|
|
return start;
|
|
}
|
|
|
|
static void str_upper(char *s)
|
|
{
|
|
for (; *s; s++) if (*s >= 'a' && *s <= 'z') *s -= 32;
|
|
}
|
|
|
|
/* -------- parameter lookup by name -------- */
|
|
|
|
static int param_find(const char *name)
|
|
{
|
|
for (int i = 0; i < NUM_PARAMS; i++) {
|
|
if (strcmp(name, get_param_name((param_idx_t)i)) == 0) return i;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/* -------- command handlers -------- */
|
|
|
|
static void cmd_begin(char *args)
|
|
{
|
|
(void)args;
|
|
bringup_mode_enter();
|
|
OK("begin fw=%s board=%s t=%.2f",
|
|
FIRMWARE_VERSION,
|
|
#ifdef BOARD_V5
|
|
"V5",
|
|
#else
|
|
"V4",
|
|
#endif
|
|
elapsed_s());
|
|
}
|
|
|
|
static void cmd_end(char *args)
|
|
{
|
|
(void)args;
|
|
OK("end reboot t=%.2f", elapsed_s());
|
|
fflush(stdout);
|
|
vTaskDelay(pdMS_TO_TICKS(200));
|
|
bringup_mode_exit();
|
|
esp_restart();
|
|
}
|
|
|
|
static void cmd_info(char *args)
|
|
{
|
|
(void)args;
|
|
esp_reset_reason_t r = esp_reset_reason();
|
|
const char *rname = "?";
|
|
switch (r) {
|
|
case ESP_RST_POWERON: rname = "POWERON"; break;
|
|
case ESP_RST_EXT: rname = "EXT"; break;
|
|
case ESP_RST_SW: rname = "SW"; break;
|
|
case ESP_RST_PANIC: rname = "PANIC"; break;
|
|
case ESP_RST_INT_WDT: rname = "INT_WDT"; break;
|
|
case ESP_RST_TASK_WDT: rname = "TASK_WDT";break;
|
|
case ESP_RST_WDT: rname = "WDT"; break;
|
|
case ESP_RST_DEEPSLEEP:rname = "DEEPSLEEP";break;
|
|
case ESP_RST_BROWNOUT: rname = "BROWNOUT";break;
|
|
default: break;
|
|
}
|
|
OK("info reset=%s heap=%u min_heap=%u fw=%s build=%s",
|
|
rname,
|
|
(unsigned)esp_get_free_heap_size(),
|
|
(unsigned)esp_get_minimum_free_heap_size(),
|
|
FIRMWARE_VERSION, BUILD_DATE);
|
|
}
|
|
|
|
static void cmd_flash(char *args)
|
|
{
|
|
(void)args;
|
|
const esp_partition_t *p = esp_partition_find_first(
|
|
ESP_PARTITION_TYPE_DATA, 0x42, "post_test");
|
|
if (!p) { ERR("flash reason=\"no post_test partition\""); return; }
|
|
|
|
/* Erase, write pattern, read back, compare. */
|
|
const size_t N = 64;
|
|
uint8_t pattern[N], readback[N];
|
|
for (size_t i = 0; i < N; i++) pattern[i] = (uint8_t)(i ^ 0xA5);
|
|
|
|
esp_err_t e = esp_partition_erase_range(p, 0, 4096);
|
|
if (e != ESP_OK) { ERR("flash stage=erase err=%s", esp_err_to_name(e)); return; }
|
|
e = esp_partition_write(p, 0, pattern, N);
|
|
if (e != ESP_OK) { ERR("flash stage=write err=%s", esp_err_to_name(e)); return; }
|
|
e = esp_partition_read(p, 0, readback, N);
|
|
if (e != ESP_OK) { ERR("flash stage=read err=%s", esp_err_to_name(e)); return; }
|
|
if (memcmp(pattern, readback, N) != 0) {
|
|
ERR("flash stage=compare mismatch");
|
|
return;
|
|
}
|
|
OK("flash post_part=roundtrip log_head=%u log_tail=%u partitions_size=%u",
|
|
(unsigned)log_get_head(), (unsigned)log_get_tail(),
|
|
(unsigned)(p->address));
|
|
}
|
|
|
|
static void cmd_i2c(char *args)
|
|
{
|
|
(void)args;
|
|
/* i2c_post re-probes TCA9555 by reading its input register. */
|
|
esp_err_t e = i2c_post();
|
|
if (e != ESP_OK) { ERR("i2c tca9555=nack err=%s", esp_err_to_name(e)); return; }
|
|
OK("i2c tca9555=ack");
|
|
}
|
|
|
|
static void cmd_led(char *args)
|
|
{
|
|
/* BU.LED <mask 0..7> [on|off] — just writes mask if given; ignores the
|
|
* optional second token and uses it when present to set/clear. */
|
|
char *s = args;
|
|
char *tok = next_tok(&s);
|
|
if (!tok) { ERR("led reason=\"missing mask\""); return; }
|
|
unsigned mask = (unsigned)strtoul(tok, NULL, 0);
|
|
if (mask > 7) mask = 7;
|
|
i2c_set_led1((uint8_t)mask);
|
|
OK("led mask=%u", mask);
|
|
}
|
|
|
|
static void cmd_adc_once(void)
|
|
{
|
|
int bat_mv = get_bat_raw_mv();
|
|
float bat_V = get_battery_V();
|
|
#ifdef BOARD_V5
|
|
int isens_mv = get_isens_raw_mv();
|
|
float isens_A = -(isens_mv - 1650.0f) / 13.2f;
|
|
int voc_mv = get_voc_raw_mv();
|
|
int fault = get_hw_overcurrent_fault() ? 1 : 0;
|
|
OK("adc bat_mv=%d bat_V=%.3f isens_mv=%d isens_A=%+.2f voc_mv=%d fault=%d",
|
|
bat_mv, bat_V, isens_mv, isens_A, voc_mv, fault);
|
|
#else
|
|
OK("adc bat_mv=%d bat_V=%.3f", bat_mv, bat_V);
|
|
#endif
|
|
}
|
|
|
|
static void cmd_adc(char *args)
|
|
{
|
|
(void)args;
|
|
cmd_adc_once();
|
|
}
|
|
|
|
static void cmd_adc_stream(char *args)
|
|
{
|
|
char *s = args;
|
|
char *t = next_tok(&s);
|
|
int sec = t ? atoi(t) : 5;
|
|
if (sec < 1) sec = 1;
|
|
if (sec > 60) sec = 60;
|
|
|
|
int64_t end_us = esp_timer_get_time() + (int64_t)sec * 1000000;
|
|
while (esp_timer_get_time() < end_us) {
|
|
#ifdef BOARD_V5
|
|
int bat_mv = get_bat_raw_mv();
|
|
int isens_mv = get_isens_raw_mv();
|
|
EVT("adc t=%.2f bat_mv=%d isens_mv=%d", elapsed_s(), bat_mv, isens_mv);
|
|
#else
|
|
int bat_mv = get_bat_raw_mv();
|
|
EVT("adc t=%.2f bat_mv=%d", elapsed_s(), bat_mv);
|
|
#endif
|
|
esp_task_wdt_reset();
|
|
vTaskDelay(pdMS_TO_TICKS(200));
|
|
}
|
|
OK("adc.stream sec=%d", sec);
|
|
}
|
|
|
|
static void cmd_sensors_watch(char *args)
|
|
{
|
|
/* BU.SENSORS.WATCH [sec]
|
|
* sec omitted or 0 → watch indefinitely; exit when any byte arrives
|
|
* on UART0 (operator hit Enter on the host side).
|
|
* sec > 0 → watch for that many seconds, then return.
|
|
*/
|
|
char *s = args;
|
|
char *t = next_tok(&s);
|
|
int sec = t ? atoi(t) : 0;
|
|
bool indefinite = (sec <= 0);
|
|
if (!indefinite && sec > 600) sec = 600;
|
|
|
|
static const char *names[N_SENSORS] = {"SAFETY", "DRIVE", "JACK", "AUX"};
|
|
bool last_state[N_SENSORS];
|
|
bool make_seen[N_SENSORS] = {false};
|
|
bool break_seen[N_SENSORS] = {false};
|
|
/* Read the GPIO directly — the normal sensor pipeline runs in the FSM
|
|
* task (sensors_check()), which is paused while bring-up is active, so
|
|
* get_sensor() returns stale state. Active-low → inverted. */
|
|
#define _SENS_RAW(i) (!gpio_get_level(sensor_pins[i]))
|
|
extern uint8_t sensor_pins[N_SENSORS];
|
|
for (int i = 0; i < N_SENSORS; i++) last_state[i] = _SENS_RAW(i);
|
|
|
|
int64_t end_us = esp_timer_get_time() + (int64_t)sec * 1000000;
|
|
int64_t next_snapshot_us = esp_timer_get_time();
|
|
while (indefinite || esp_timer_get_time() < end_us) {
|
|
/* Abort on any UART input. */
|
|
size_t available = 0;
|
|
if (uart_get_buffered_data_len(UART_NUM_0, &available) == ESP_OK
|
|
&& available > 0) {
|
|
uint8_t drain[64];
|
|
while (available > 0) {
|
|
int n = uart_read_bytes(UART_NUM_0, drain, sizeof(drain), 0);
|
|
if (n <= 0) break;
|
|
available = (size_t)n < available ? available - (size_t)n : 0;
|
|
}
|
|
break;
|
|
}
|
|
|
|
for (int i = 0; i < N_SENSORS; i++) {
|
|
bool now = _SENS_RAW(i);
|
|
if (now != last_state[i]) {
|
|
const char *edge = now ? "make" : "break";
|
|
if (now) make_seen[i] = true; else break_seen[i] = true;
|
|
EVT("sensor name=%s edge=%s t=%.2f",
|
|
names[i], edge, elapsed_s());
|
|
last_state[i] = now;
|
|
}
|
|
}
|
|
|
|
/* Periodic state snapshot of all four sensors — includes the
|
|
* no-connect slot so a floating/misrouted pin is visible. */
|
|
int64_t now_us = esp_timer_get_time();
|
|
if (now_us >= next_snapshot_us) {
|
|
next_snapshot_us = now_us + 250000; /* 250 ms */
|
|
EVT("state t=%.2f SAFETY=%d DRIVE=%d JACK=%d AUX=%d "
|
|
"isr_s=%u isr_d=%u isr_j=%u isr_a=%u",
|
|
elapsed_s(),
|
|
(int)_SENS_RAW(SENSOR_SAFETY),
|
|
(int)_SENS_RAW(SENSOR_DRIVE),
|
|
(int)_SENS_RAW(SENSOR_JACK),
|
|
(int)_SENS_RAW(SENSOR_AUX2),
|
|
(unsigned)get_sensor_isr_edges(SENSOR_SAFETY),
|
|
(unsigned)get_sensor_isr_edges(SENSOR_DRIVE),
|
|
(unsigned)get_sensor_isr_edges(SENSOR_JACK),
|
|
(unsigned)get_sensor_isr_edges(SENSOR_AUX2));
|
|
}
|
|
|
|
esp_task_wdt_reset();
|
|
vTaskDelay(pdMS_TO_TICKS(10));
|
|
}
|
|
#undef _SENS_RAW
|
|
|
|
/* Summary: which sensors saw both edges. */
|
|
char buf[128];
|
|
size_t used = 0;
|
|
for (int i = 0; i < N_SENSORS; i++) {
|
|
const char *tag =
|
|
(make_seen[i] && break_seen[i]) ? "both"
|
|
: make_seen[i] ? "make_only"
|
|
: break_seen[i] ? "break_only"
|
|
: "none";
|
|
int n = snprintf(buf + used, sizeof(buf) - used,
|
|
"%s%s=%s", used ? " " : "", names[i], tag);
|
|
if (n < 0 || (size_t)n >= sizeof(buf) - used) break;
|
|
used += n;
|
|
}
|
|
OK("sensors.watch sec=%d %s", indefinite ? -1 : sec, buf);
|
|
}
|
|
|
|
static bool parse_bridge(const char *s, bridge_t *out)
|
|
{
|
|
if (strcasecmp(s, "DRIVE") == 0) { *out = BRIDGE_DRIVE; return true; }
|
|
if (strcasecmp(s, "JACK") == 0) { *out = BRIDGE_JACK; return true; }
|
|
if (strcasecmp(s, "AUX") == 0) { *out = BRIDGE_AUX; return true; }
|
|
return false;
|
|
}
|
|
|
|
static bool parse_dir(const char *s, uint8_t *out)
|
|
{
|
|
if (strcasecmp(s, "FWD") == 0 || strcasecmp(s, "UP") == 0)
|
|
{ *out = BRIDGE_FWD; return true; }
|
|
if (strcasecmp(s, "REV") == 0 || strcasecmp(s, "DOWN") == 0)
|
|
{ *out = BRIDGE_REV; return true; }
|
|
if (strcasecmp(s, "ON") == 0)
|
|
{ *out = BRIDGE_ON; return true; }
|
|
if (strcasecmp(s, "OFF") == 0)
|
|
{ *out = BRIDGE_OFF; return true; }
|
|
return false;
|
|
}
|
|
|
|
static void cmd_relay(char *args)
|
|
{
|
|
char *s = args;
|
|
char *t_bridge = next_tok(&s);
|
|
char *t_dir = next_tok(&s);
|
|
char *t_ms = next_tok(&s);
|
|
if (!t_bridge || !t_dir) { ERR("relay reason=\"usage: <bridge> <dir> [ms]\""); return; }
|
|
|
|
int ms = t_ms ? atoi(t_ms) : 150;
|
|
if (ms < 10) ms = 10;
|
|
if (ms > 2000) ms = 2000;
|
|
|
|
if (!get_is_safe()) { SKIP("relay reason=\"safety open\""); return; }
|
|
|
|
/* P10 / sensor power rail. Default is ON; pulse it OFF to prove the line
|
|
* can be driven, then restore. */
|
|
if (strcasecmp(t_bridge, "SENSORS") == 0) {
|
|
i2c_relays_sleep(); /* P10 low */
|
|
vTaskDelay(pdMS_TO_TICKS(ms));
|
|
i2c_relays_idle(); /* P10 high (restore) */
|
|
OK("relay bridge=SENSORS ms=%d", ms);
|
|
return;
|
|
}
|
|
|
|
bridge_t b;
|
|
uint8_t dir;
|
|
if (!parse_bridge(t_bridge, &b)) { ERR("relay reason=\"bad bridge\""); return; }
|
|
if (!parse_dir(t_dir, &dir)) { ERR("relay reason=\"bad dir\""); return; }
|
|
|
|
/* Sample current before, pulse, sample at midpoint, release, sample after.
|
|
* FSM is paused during POST, so we drive process_bridge_current() ourselves
|
|
* to refresh isens[].current before each read. We also mirror the relay
|
|
* state into last_relay_state so V5's shared autozero gate (which looks at
|
|
* last_relay_state to decide if bridges are powered) stays truthful. */
|
|
extern volatile int64_t fsm_now;
|
|
extern relay_port_t last_relay_state;
|
|
|
|
vTaskDelay(pdMS_TO_TICKS(50)); /* let things settle */
|
|
fsm_now = esp_timer_get_time();
|
|
process_bridge_current(b);
|
|
float I_before = get_bridge_A(b);
|
|
|
|
/* Which sensor to count edges on during the pulse — ISR-level counter,
|
|
* doesn't depend on sensors_check() running. */
|
|
sensor_t which_sensor = N_SENSORS;
|
|
if (b == BRIDGE_DRIVE) which_sensor = SENSOR_DRIVE;
|
|
else if (b == BRIDGE_JACK) which_sensor = SENSOR_JACK;
|
|
uint32_t edges_before = (which_sensor < N_SENSORS)
|
|
? get_sensor_isr_edges(which_sensor) : 0;
|
|
|
|
relay_port_t rs = {.raw = 0};
|
|
switch (b) {
|
|
case BRIDGE_DRIVE: rs.bridges.DRIVE = dir; break;
|
|
case BRIDGE_JACK: rs.bridges.JACK = dir; break;
|
|
case BRIDGE_AUX: rs.bridges.AUX = dir; break;
|
|
default: ERR("relay reason=\"bad bridge idx\""); return;
|
|
}
|
|
rs.bridges.SENSORS = 1;
|
|
last_relay_state = rs;
|
|
i2c_set_relays(rs);
|
|
|
|
vTaskDelay(pdMS_TO_TICKS(ms / 2));
|
|
fsm_now = esp_timer_get_time();
|
|
process_bridge_current(b);
|
|
float I_mid = get_bridge_A(b);
|
|
vTaskDelay(pdMS_TO_TICKS(ms - ms / 2));
|
|
|
|
relay_port_t idle = {.bridges = {.SENSORS = 1}};
|
|
last_relay_state = idle;
|
|
i2c_relays_idle();
|
|
vTaskDelay(pdMS_TO_TICKS(50));
|
|
fsm_now = esp_timer_get_time();
|
|
process_bridge_current(b);
|
|
float I_after = get_bridge_A(b);
|
|
float heat = efuse_get_heat(b);
|
|
int tripped = efuse_get(b) ? 1 : 0;
|
|
uint32_t edges_after = (which_sensor < N_SENSORS)
|
|
? get_sensor_isr_edges(which_sensor) : 0;
|
|
uint32_t edges = edges_after - edges_before;
|
|
|
|
OK("relay bridge=%s dir=%s ms=%d I_before=%+.2f I_mid=%+.2f I_after=%+.2f heat=%.3f tripped=%d edges=%u",
|
|
t_bridge, t_dir, ms, I_before, I_mid, I_after, heat, tripped, (unsigned)edges);
|
|
}
|
|
|
|
static void cmd_rf_watch(char *args)
|
|
{
|
|
/* BU.RF.WATCH [sec]
|
|
* sec omitted or 0 → watch indefinitely; exit when any byte arrives
|
|
* on UART0 (operator hit Enter on the host side).
|
|
*/
|
|
char *s = args;
|
|
char *t = next_tok(&s);
|
|
int sec = t ? atoi(t) : 0;
|
|
bool indefinite = (sec <= 0);
|
|
if (!indefinite && sec > 600) sec = 600;
|
|
|
|
int64_t end_us = esp_timer_get_time() + (int64_t)sec * 1000000;
|
|
int count = 0;
|
|
/* Drain any stale code from before the watch started. */
|
|
(void)rf_433_peek_latest();
|
|
while (indefinite || esp_timer_get_time() < end_us) {
|
|
/* Abort on any UART input. */
|
|
size_t available = 0;
|
|
if (uart_get_buffered_data_len(UART_NUM_0, &available) == ESP_OK
|
|
&& available > 0) {
|
|
uint8_t drain[64];
|
|
while (available > 0) {
|
|
int n = uart_read_bytes(UART_NUM_0, drain, sizeof(drain), 0);
|
|
if (n <= 0) break;
|
|
available = (size_t)n < available ? available - (size_t)n : 0;
|
|
}
|
|
break;
|
|
}
|
|
uint32_t code = rf_433_peek_latest();
|
|
if (code) {
|
|
EVT("rf code=0x%lX t=%.2f", (unsigned long)code, elapsed_s());
|
|
count++;
|
|
}
|
|
esp_task_wdt_reset();
|
|
vTaskDelay(pdMS_TO_TICKS(50));
|
|
}
|
|
OK("rf.watch sec=%d seen=%d", indefinite ? -1 : sec, count);
|
|
}
|
|
|
|
static void cmd_wifi_start(char *args)
|
|
{
|
|
(void)args;
|
|
esp_err_t e = webserver_init();
|
|
if (e != ESP_OK) { ERR("wifi.start err=%s", esp_err_to_name(e)); return; }
|
|
OK("wifi.start mode=AP ssid=\"%s\" ip=192.168.4.1",
|
|
get_param_string(PARAM_WIFI_SSID));
|
|
}
|
|
|
|
static void cmd_wifi_wait(char *args)
|
|
{
|
|
(void)args; /* no timeout — BRINGUP.md §4 Stage 6. Operator aborts via Ctrl+C. */
|
|
wifi_sta_list_t sta = {0};
|
|
int last_n = 0;
|
|
while (1) {
|
|
if (esp_wifi_ap_get_sta_list(&sta) == ESP_OK && sta.num > last_n) {
|
|
EVT("wifi.assoc n=%d t=%.2f", sta.num, elapsed_s());
|
|
last_n = sta.num;
|
|
}
|
|
/* Bail when at least one client is associated AND the web UI has
|
|
* issued at least one request (notified by webserver). */
|
|
if (last_n > 0 && s_http_reqs > 0) break;
|
|
esp_task_wdt_reset();
|
|
vTaskDelay(pdMS_TO_TICKS(200));
|
|
}
|
|
OK("wifi.wait clients=%d http_reqs=%d", last_n, s_http_reqs);
|
|
}
|
|
|
|
static void cmd_fsm(char *args)
|
|
{
|
|
char *s = args;
|
|
char *sub = next_tok(&s);
|
|
if (!sub) sub = "INFO";
|
|
str_upper(sub);
|
|
if (strcmp(sub, "INFO") == 0) {
|
|
OK("fsm state=%d err=%d idle=%d",
|
|
(int)fsm_get_state(), (int)fsm_get_error(), fsm_is_idle() ? 1 : 0);
|
|
} else {
|
|
ERR("fsm reason=\"unknown subcommand\"");
|
|
}
|
|
}
|
|
|
|
static void cmd_solar_tick(char *args)
|
|
{
|
|
(void)args;
|
|
(void)solar_run_fsm();
|
|
OK("solar tick=ok chg_bulk=%d",
|
|
gpio_get_level(GPIO_NUM_26));
|
|
}
|
|
|
|
/* BU.PARAM GET <key> | BU.PARAM SET <key> <value> */
|
|
static void cmd_param(char *args)
|
|
{
|
|
char *s = args;
|
|
char *op = next_tok(&s);
|
|
char *key = next_tok(&s);
|
|
if (!op || !key) { ERR("param reason=\"usage: GET <k> | SET <k> <v>\""); return; }
|
|
str_upper(op);
|
|
int idx = param_find(key);
|
|
if (idx < 0) { ERR("param reason=\"unknown key\" key=%s", key); return; }
|
|
|
|
param_type_e type = get_param_type((param_idx_t)idx);
|
|
|
|
if (strcmp(op, "GET") == 0) {
|
|
param_value_t v = get_param_value_t((param_idx_t)idx);
|
|
switch (type) {
|
|
case PARAM_TYPE_u16: OK("param key=%s value=%u", key, v.u16); break;
|
|
case PARAM_TYPE_i16: OK("param key=%s value=%d", key, v.i16); break;
|
|
case PARAM_TYPE_u32: OK("param key=%s value=%u", key, (unsigned)v.u32); break;
|
|
case PARAM_TYPE_i32: OK("param key=%s value=%d", key, (int)v.i32); break;
|
|
case PARAM_TYPE_f32: OK("param key=%s value=%.9g", key, v.f32); break;
|
|
case PARAM_TYPE_f64: OK("param key=%s value=%.17g",key, v.f64); break;
|
|
case PARAM_TYPE_str: OK("param key=%s value=\"%s\"", key, get_param_string((param_idx_t)idx)); break;
|
|
}
|
|
return;
|
|
}
|
|
|
|
if (strcmp(op, "SET") == 0) {
|
|
char *val = next_tok(&s);
|
|
if (!val) { ERR("param reason=\"missing value\""); return; }
|
|
esp_err_t e = ESP_OK;
|
|
if (type == PARAM_TYPE_str) {
|
|
e = set_param_string((param_idx_t)idx, val);
|
|
} else {
|
|
param_value_t v = {0};
|
|
switch (type) {
|
|
case PARAM_TYPE_u16: v.u16 = (uint16_t)strtoul(val, NULL, 0); break;
|
|
case PARAM_TYPE_i16: v.i16 = (int16_t)strtol(val, NULL, 0); break;
|
|
case PARAM_TYPE_u32: v.u32 = (uint32_t)strtoul(val, NULL, 0); break;
|
|
case PARAM_TYPE_i32: v.i32 = (int32_t)strtol(val, NULL, 0); break;
|
|
case PARAM_TYPE_f32: v.f32 = strtof(val, NULL); break;
|
|
case PARAM_TYPE_f64: v.f64 = strtod(val, NULL); break;
|
|
default: break;
|
|
}
|
|
e = set_param_value_t((param_idx_t)idx, v);
|
|
}
|
|
if (e != ESP_OK) { ERR("param reason=\"set failed\" err=%s", esp_err_to_name(e)); return; }
|
|
e = commit_params();
|
|
if (e != ESP_OK) { ERR("param reason=\"commit failed\" err=%s", esp_err_to_name(e)); return; }
|
|
OK("param key=%s set=ok committed=yes", key);
|
|
return;
|
|
}
|
|
|
|
ERR("param reason=\"unknown op\" op=%s", op);
|
|
}
|
|
|
|
/* -------- dispatcher -------- */
|
|
|
|
typedef void (*cmd_fn)(char *args);
|
|
|
|
struct cmd_entry {
|
|
const char *name; /* uppercased, no BU. prefix */
|
|
cmd_fn fn;
|
|
};
|
|
|
|
static const struct cmd_entry CMDS[] = {
|
|
{ "BEGIN", cmd_begin },
|
|
{ "END", cmd_end },
|
|
{ "INFO", cmd_info },
|
|
{ "FLASH", cmd_flash },
|
|
{ "I2C", cmd_i2c },
|
|
{ "LED", cmd_led },
|
|
{ "ADC", cmd_adc },
|
|
{ "ADC.STREAM", cmd_adc_stream },
|
|
{ "SENSORS.WATCH", cmd_sensors_watch},
|
|
{ "RELAY", cmd_relay },
|
|
{ "RF.WATCH", cmd_rf_watch },
|
|
{ "WIFI.START", cmd_wifi_start },
|
|
{ "WIFI.WAIT", cmd_wifi_wait },
|
|
{ "FSM", cmd_fsm },
|
|
{ "SOLAR.TICK", cmd_solar_tick },
|
|
{ "PARAM", cmd_param },
|
|
};
|
|
|
|
void bringup_handle_line(char *line)
|
|
{
|
|
/* Trim leading whitespace. */
|
|
while (*line == ' ' || *line == '\t') line++;
|
|
if (*line == '\0') return;
|
|
|
|
/* Expect "BU.<CMD> [args]" */
|
|
if (strncasecmp(line, "BU.", 3) != 0) {
|
|
ERR("dispatch reason=\"missing BU. prefix\"");
|
|
return;
|
|
}
|
|
line += 3;
|
|
|
|
/* Split CMD token from args. */
|
|
char *sp = line;
|
|
while (*sp && *sp != ' ' && *sp != '\t') sp++;
|
|
char *args = sp;
|
|
if (*sp) { *sp = '\0'; args = sp + 1; }
|
|
|
|
str_upper(line);
|
|
|
|
for (size_t i = 0; i < sizeof(CMDS)/sizeof(CMDS[0]); i++) {
|
|
if (strcmp(line, CMDS[i].name) == 0) {
|
|
CMDS[i].fn(args);
|
|
return;
|
|
}
|
|
}
|
|
ERR("dispatch reason=\"unknown command\" cmd=%s", line);
|
|
}
|